Best K Locksmith walks Ottawa homeowners through the lock rekeying process every week, and most people are surprised by how little changes on the door. The lock stays in place, but the inside of the cylinder gets new pins that match a new key. Old keys stop working. This guide explains each step, what a locksmith checks first, and how to tell whether your lock suits rekeying at all.
What Happens Inside the Cylinder
A standard house lock uses a row of small spring-loaded pin stacks. Each stack holds a bottom pin and a top pin. When the correct key slides in, the cuts lift every stack to the same line, called the shear line. The cylinder then turns freely and the bolt moves.
Rekeying changes the bottom pins, and that is the heart of the lock rekeying process. The new pins match a different pattern of cuts. The old key still enters the lock, but it lifts the pins to the wrong height. The cylinder stays locked. Nothing about the door, the bolt, or the handle needs to change.
This is why rekeying suits so many situations. You keep the hardware you already like and simply reset who holds a working key.
The Lock Rekeying Process Step by Step
Every locksmith has a slightly different routine, but the core of the lock rekeying process looks the same on most residential cylinders. Here is the usual order of work.
1. Confirm the lock can be rekeyed. The locksmith checks the brand, the keyway, and the condition of the cylinder.
2. Remove the cylinder or open the lock body. On many deadbolts the cylinder comes out in a minute or two.
3. Take out the old pins. A special follower tool holds the springs and pins in place while the plug is removed.
4. Fit new pins. The locksmith picks bottom pins to match the new key's cuts.
5. Cut the new key. The key is cut to the new pin pattern and tested in the plug.
6. Reassemble and test. The cylinder goes back in, and the locksmith runs the bolt several times with the new key.
7. Check the old key. A good locksmith always confirms the old key no longer turns the lock.
Why the Follower Tool Matters
The follower is a small rod the same diameter as the plug. It pushes the plug out while keeping the pins and springs inside the housing. Without it, the pins spill out and the springs launch across the room. Using the right tool keeps the work clean and fast.
What the Final Test Looks Like
Testing is more than one turn of the key. A careful technician tests the lock in the door, with the door open and closed. They check that the bolt throws fully into the strike. They also try the old key to prove it fails. This last step is what separates a finished job from a risky one.
Which Locks Can Be Rekeyed
Most pin-tumbler locks accept rekeying. That includes the majority of entry handlesets, deadbolts, and padlocks with removable cores. Some locks are not good candidates.
| Lock type | Rekey friendly? | What the locksmith checks |
|---|---|---|
| Standard pin-tumbler deadbolt | Yes | Cylinder condition, bolt alignment |
| Entry handle set with keyed cylinder | Yes | Wear on the plug and latch |
| Interchangeable core lock | Yes | Core type and control key |
| Worn or damaged cylinder | Sometimes | Whether new pins will hold |
| Very old or unbranded lock | Sometimes | Parts availability |
| Lock with broken internal parts | No, replace | Latch, spindle, and bolt |
Cylinder quality follows grading standards such as those published by BHMA, and a higher grade usually holds up better through repeated rekeying. Age alone does not rule out rekeying. A well-made lock that has aged gracefully often works better than a new budget lock. The condition of the plug and the bolt tells the real story. If you want to compare the two paths in more detail, read our guide to rekeying versus replacing locks.
Signs Rekeying Is the Right Call
Rekeying fits any moment when you want to cancel old keys without buying new hardware. These are the most common triggers we hear about from Ottawa households.
- You just bought or rented a home and do not know who holds a key.
- A roommate, tenant, or contractor moved out.
- A key went missing and you cannot rule out theft.
- A relationship ended and shared access needs to stop.
- You want every door in the house to share one key.
In each case, the lock itself works fine. The risk comes from the unknown keys. Rekeying closes that gap without touching the door. If you are weighing the timing, our article on when to rekey a home in Ottawa goes deeper into the trigger events.
Rekeying Several Doors to One Key
Many homeowners rekey the front door, back door, and garage entry so a single key opens all three. The locksmith sets matching pin patterns in each cylinder. You then carry one key instead of a ring of three. Our lock rekeying service covers this setup for houses and small businesses.
Preparing for the Visit and Avoiding Mistakes
A few simple steps help the visit run smoothly. None of them requires tools or skill.
First, count the locks you want rekeyed. Include side doors, garage entries, and any padlocks. Second, gather every key you have for those locks, because the locksmith can use them to confirm the old pattern fails afterward. Third, note any lock that sticks, spins, or feels loose. Those details help the technician decide whether a cylinder needs repair instead.
Finally, decide how many new keys you want cut. Extra keys are easy to cut during the visit. Adding them later takes another trip.
Common Mistakes With Rekeying
Rekeying looks simple on video, and that tempts people to try it with a retail kit. The lock rekeying process takes patience and the right tools. Kits do work on some locks. They also invite errors when the wrong pin lands in the wrong chamber.
- Mixing up pin sizes so the key sticks or turns only sometimes.
- Losing a spring during disassembly.
- Skipping the old-key test and assuming it worked.
- Forcing a worn plug that needs repair or replacement.
If a lock feels rough after a DIY attempt, stop turning it. Forcing the key can snap it in the cylinder. A snapped key adds a second problem on top of the first.
Lock Rekeying Process: Time and Quote Expectations
People often ask how long the work takes. The honest answer is that it depends on the number of locks, their condition, and how accessible they are. A single standard deadbolt is a short job. A whole house with older hardware takes longer.
We give an honest quote after we assess your locks, so you know the scope before any work starts. We do not guess over the phone, because a worn cylinder can change the plan.
Frequently Asked Questions
Does rekeying make my lock more secure?
It makes the lock secure against anyone holding an old key. It does not upgrade the lock's resistance to picking or drilling. If you also want stronger hardware, ask about a replacement with a higher-grade cylinder.
Do I need to remove the door to rekey a lock?
No. The cylinder comes out of the lock while the door stays on its hinges. The work happens at the door, and the lock goes back in place when finished.
Can a rekeyed lock use my existing key?
Yes, in some cases. The locksmith can fit pins to match a key you already carry, which helps when you want one key for several doors. The old pattern is the one that stops working.
How do I know the rekey worked?
The old key should enter the lock but fail to turn it. Ask the technician to demonstrate this before they leave. A proper job always includes that check.
Contact Best K Locksmith
Ready to reset who holds a key to your home? Call Best K Locksmith at (613) 707-4884 or visit us at 3835 McBean St, Ottawa. We assess your locks first and then give you an honest quote before any work begins.